The standard configuration that comes with the installation of the game may look good – the graphics are nice, the sound bumps through your headset and you can move intuitively through the map. But to blast some ownage, it is necessary to do some tweaking.

Sadly or not – Wolfenstein: Enemy Territory is a game, where tweaking your configuration and/or hardware can get you big advantages over those, who don’t do it or who don’t have set up the game optimally…But before going to the details I may wanna destroy your dreams by pronouncing the following rule:

No, there is not the single ownage configuration optimized for aiming, accuracy, jumping or stuff like that. You always gotta find your own special configuration that suits you best for your setup (hardware, mouse, mouspad, way of playing, …) and then stick to it not changing it again every now and then!

But now to you config…

Where do I get good configs from other players as examples?

CF: download configs on player profile pages

Search the Crossfire.nu-community. There are many players who let you download their game-configurations. Maybe you want to start with the configs from foonr or overdrive and then you can rummage further in their buddy-lists. Try out different configs and look if they will suit you with little adaptions (e. g. keyboard, mouse, …). You can also get a lot of suggestions on how to organize your configuration-files by having a look on the setup of experienced players… So: download a lot of them. It’s free!

No way, dude. I want to start off with my own config; how do I do this?

If you don’t want to take another configuration as a basis, you can of course set up your autoexec.cfg completely on your own. This might even be useful, because this way you force yourself to deal with the meaning and effects of all the variables in W:ET and get a real crack (or geek?).

• I you want to set it up completely on your own, the article “Console and CVAR-Commands” may help in combination with “Scripting for newbies“.
• 

  Config Maker V3.0

  You can also use a software/config-maker, if you know the meanings of all the variables; try out Config Maker v3.0 from MiguelNunes (2005).

What are the key-factors I may have to adapt and tweak?

In order of their importance (opinions on that of course may vary):

1. Mouse-settings
   - overall sensitivity:
   Download and work through “Aiming By RaZiel” to find your personal best sensitivity. Basically if you are able to focus clearly on a spot while strafing with or without stamina, you meet most requirements to own.

   - vertical & horizontal sensitivity: read the details here

   - acceleration (coming soon)

   - dpi (coming soon)

   - other stuff (e.g. pointer-precision)

2. 

   keyboard buttons and their variable names

   Keyboard-settings
   Read on at
   “Planetwolfenstein for newbies: Setting up your controls“

3. Graphics settings for getting high and stable 43/63/72/76/83/100/ 125/166 fps. Please find an exhaustive guide in the “Wolfenstein for newbies: Tweaking Guide“. All important variables are explained by text and screenshots.
4. Netsettings for optimal client-server-communication.
   I recommend to read on at “Connection, Framerate and Visual Tweaks“. The article explains the netsetting-variables of the quake3-engine. But it also applies on W:ET which is based on the engine.
5. Other tweaking (e. g. other memory- and cpu-eating stuff like sound)
6. Fine-tuning (e. g. your view, cross-hair, hud, having a dedicated config for some maps)
7. Scripts (e. g. for quickly changing spawnpoints or your class without losing focus on frags). Read on at “Planetwolfenstein for newbies: Scripting for newbies“
8. Vsay-binds and your colored nickname (help)- yeah we all need some personality, do we?!

Last but not least…

• Be sure you have the latest drivers and updates installed for your hardware (graphics, motherboard, soundcard, bios, …)
• Besides the ingame tuning (your configuration) you might also have a look at the global settings (graphics-driver setup for performance, windows mouse setup (6/11 at Win XP), …)
• You may wanna consider to also tweak your hardware (e. g. mouse on USB vs. PS/2)

Anything missing? Suggestions? Is this collection of links helpful..?

In Wolfenstein: Enemy Territory you do not necessarily shoot at where your cross-hair points: like in real life bullets do spread. There are three dimensions where you should know the details to master spread and improve your accuracy and aiming: (A) the game engine, (B) your setup/configuration and (C) your way of playing.

But now to the insights…

(A) The game-engine and weapon-spread

In ET the spread of your standard weapons (mp40, Thomson, Luger, colt, Sten, …) is affected by 5 factors:

1. View: moving your cross-hair / looking around increases spread
   The more you move your cross-hair around, the more weapon spread you will get. In times you move your mouse, spread increases while in times you don’t move your mouse, it will decrease steadily. Player velocity does not have any impact on spread of unscoped weapons. You can see the size of your weapon spread by activating cross hair-pulsing for example:

   set cg_crosshairPulse 1 // activate cross-hair pulsating
   set cg_drawcrosshair 4 // cross-hair: little spot in center plus pulsating circle around it

   

   big hitboxes (jaymod): hitable behind a corner

   So be aware of the ET’s hitbox model (hitboxes are much bigger than the models which makes some cross-hair-movement unnecessary) and reduce cross-hair-movement to a minimum. Especially avoid erratic mouse-movements and trace as smooth as possible. RaZiel mastered the idea of aiming like this – have a look at his tutorial.

2. Shooting: continuous shooting increases spread
   Short range fights usually don’t last long and every hit is crucial, so in most cases you are forced to shoot continuesly and shooting bursts is no option. Long range combats often last longer. Shooting small bursts of 3 to 5 bullets each should be considered if you can’t start of the fight with doing massive damage to your opponent. Concentrate on short range duels to get the maximum out of you rounds.
3. Receiving Damage: getting hit by bullets increases spread
   When you get hit by your opponent, your screen shakes. This will hurt your aim. Further more the knock back will raise weapon spread (analysis/implications from overdrive). Both make it inevitable for you to do your best not to get hit – strafe with and without stamina, use obsticles as cover, crouch, prone, …
4. 

   spread

   Movement: crouching and proning decrease spread while beeing in the air dramatically increases spread
   [GORE]Hallelujah did an analysis on how movement affects weapon-spread back in 2003. He found out that spread in standing/crouching/proning-position is nearly equal, when you fire small bursts of 2-3 bullets. If you fire continuously, the spread of crouching and proning is still the same but in standing position it is much higher (see screenshot). Further more Madscientist found out in his analysis 2006 that crouching will reduce spread to 50% from standing position. Being in the air (jumping, free fall, strafing on rough terrain, …) will result in twice the maximum spread you get when shooting in standing position. And proning will give you maximum spread for the first second and then decays to half the spread as crouching does.

5. Experience-Points: light weapons level 4 and covert ops level 3 decrease spread
   When you receive light weapons level 4, your weapon spread will reduce by 35%. (Note that it is level 4 and not level 3 like the manual says as [GORE]Hallelujah points out). Further more covert ops level 3 reduces spread by 35% for the Sten and the FG42. Interestingly this spread reduction seems to be transportable on the standard-weapons and also combineable with light weapons level 4 for maximum spread reduction (see analysis again from [GORE]Hallelujah). You should be aware of that to be able to evaluate your own aim and that of others on the server (e. g. if you join a server with players who have many XP).
6. Your weapon choice: the MP40 (Axis) seems to have slightly less spread than the Thomson (Allies)
   

   Spread: MP40 vs. Thomson

   Ifurita from planetwolfenstein did an analysis some years ago in RTCW on how many rounds a weapon is able to fire per second. He found out that the MP40 has a slightly higher firering rate than the Thomson (~ 6 vs. 5 rounds per second). You should now probably expect compensating the Axis advantage by having more spread. On the contrary: from the screenshots he made you can conclude that the MP 40 also has slightly less spread when fired in small bursts from 3 to 5 rounds. Of course all on the condition that the analysis is a.) correct and b.) also applies on Wolfenstein: Enemy Territory.

(B) Your Config

1. Mousepad/-underground: Make sure your mousepad is clean and you just a minimum friction between pad and your mouse. The more friction, the less smooth will be your mousemovement.
2. Sensitivity: a sensitivity of zero would reduce weapon spread due to crosshairmovement to zero of course. But that wouldn’t be practical. Low sensers have got some advantages considering weapon spread. So they usually also do more headshots than high sensitivity users. I use a sensitivity of 5 in connection with pointerspeed 6 of 11 in windows xp which is very high, but manageable. See the Aiming by RaZiel-Tutorial for finding your sensitivity.
3. FPS / Frames per second: As overdrive states in his article, FPS increases recoil and your mouse will react a lot faster the higher the frames per second. Keep your FPS high, but as stable as possible at the same time. I have a quite old computer and thus I use com_maxfps 76. In most maps I can archive a stable FPS like this.
4. Mouserate: the higher, the smoother your aim can be. Basically you can chose between USB and PS/2. RaZiel stated 2003 that for him PS/2 worked better than USB, because with his Logitech Mouse he het a.) a higher mouserate of 200hz and b.) a more stable one that with USB (120hz). Overdrive stated 2006 in his article, that nowadays for most mice USB would be more suitable than PS/2 and that you can archive 450, 500 or even 1000hz. I myself use a Logitech MX518 with 200hz and inputbufferlength 100 on PS/2. With USB I could only get a maximum of 120hz. To check how often your mousedata gets refreshed check mouserate.exe from that RaZiel-Package (Tools-Folder).
5. FPS > mousrate: Madscientist found out about the phenomenon that spread due to cross-hair movement will decrease when you got more frames per second than mouse signals per second. This sounds logical as some for some frames the game engine cannot register any mouse movement which results in decreasing spread. Turn spread can be even reduced to zero (!) when FPS is twice as high as the mouserate. So if you put your mouse on USB with standard polling rate of 125hz and you have constant 250fps – … lucky boy!
6. Mouse-DPI / -Dots Per Inch: the more dpi, the smoother your aiming can be. But be aware of a little bug in the quake-engine that causes negative acceleration with high DPI.

(C) Your way of playing

(soon)

Note: if you want to play the game completely without spread, just check out the server under 85.17.39.194 which Madscientist set up (2006 – still active?).